Forum Discussion
- JohnMorgan-c50cFormer Staff
Hi, Borry!
Good news! I think I solved your issue! I think this is happening because there isn't anything in the slides after the first slide. I copied and pasted the video into the remaining slides and it didn't add the checkmarks after I dragged the slide on the first video. I added a link to a video below.
Thanks for reaching out!
- Jürgen_Schoene_Community Member
this does not solved not the problem
I have added the example with some real pages (without video)
https://360.articulate.com/review/content/74df57a7-bd62-4a9c-bd14-3b36967ab70e/review
you can see, if you do the trick with the video, every page will be shown very short and the course is finished after about 1 second (every page after the video page has a 5 sek timeline)
the problem is the trigger on slide1
if you use the video trick, this trigger "jump to next slide" is repeated multiple times => so the course is finished after on second- BorryKoccy-086fCommunity Member
I was going to tell that Jürgen thanks. John, you may not notice that but you jumped to the third slide. It happens when there are no empty slides. That is not the solution but you stopped dragging early. If you have dragged as I do, the bug happens.
- Jürgen_Schoene_Community Member
the internal problem seem to be
the mousedown/mousemove-event handler of the video is not interrupted by slide change
-> so it fires the wrong (outdated) event on and on